August 24th, 2011 
vdate 
The Legacy Industrial trigger gun offers industrial OEM (original equipment manufacturer) and aftermarket replacement quality for the pressure cleaning industry. This spray gun features an optimal spray angle with a 14% less trigger force (LTF). (more…)
August 10th, 2011 vdate 
The chemical injector tip, also known as the soap nozzle, is the pressure washer nozzle that is used when applying any form of chemical onto the surface that runs through your washer. (more…)
April 21st, 2011 vdate 
The Ignition transformer takes line voltage and steps it up to the approximately 10,000 volts to create the spark that jumps the gap between the ignition electrodes. (more…)
April 13th, 2011 vdate 
The high pressure ball valve shown here features rugged carbon steel construction, 2-way, NPT 3/8" F x 3/8" F threads, blow-out proof stems, Delrin ball seats, Viton 0-rings and 7,350 maximum psi. (more…)
March 31st, 2011 vdate 
MOSMATIC Duct Cleaners are specially designed to clean Ducts, Trash-Chutes, Vents, Restaurant Hoods, Tanks and more. This is the perfect accessory for any hot or cold pressure washer. (more…)
March 29th, 2011 vdate 
Switch Types
There are several switch types, which may be used in high pressure cleaning equipment. (more…)
September 16th, 2010 vdate 
The fuel Pump moves the fuel oil from the fuel tank to the fuel nozzle. The pump uses a meshed gear set to squeeze the fuel through the pump at about 100 psi. (more…)
July 30th, 2010 vdate 
The telescoping wand can keep your feet flat on the ground and extend your reach one, two or even three stories high. (more…)
March 16th, 2010 vdate 
Produce up to 45% more work with 20% less sand with this heavy-duty industrial grade sand blast kit. It will remove coatings from almost any surface, such as metal, heavy graffiti accumulations, and paint preparation. (more…)
November 18th, 2009 vdate 
The Dump Gun
A dump gun avoids the pressure spike by simply re-routing the flow of water at the gun. (more…)
RSS Feed
Twitter
Posted in 
Tags: 